We all want to enjoy brown and crispy waffles, but not all waffle makers are able to make great waffles. That’s why you should not just select any waffle maker at random. Thankfully, the Villaware waffle maker is known for producing great waffles. First off, you need to be aware that Villaware has several models of waffle makers. You get to choose the one that suits you.
Also, all the models have several waffle settings. Lower settings produce lighter and less crispy waffles, while higher settings produce darker and crispier settings. It is recommended that you choose setting #3 or #4 for the first time. Later, you can choose the setting that suits you more. You also need to bear in mind that it takes this device up to 5 – 8 minutes to preheat and about 4-5 minutes to produce crispy waffles that are soft inside.
How to Use a Villaware Waffle Maker?
Before using this device for the first time, here are a few things to note. When you preheat the device the very first time, it may emit some smoke and a funny odor. Don’t fret over it. The issue will not re-occur subsequent times.
However, it is advisable to discard the first batch of waffles because of the smoke and odor. Also, it is recommended that you choose setting #3 or #4 to preheat the device for the first time. Subsequently, you can choose a higher or lower setting. With time, you’ll discover the setting that produces the best waffles for you.
Step 1:
Plug the device into your 110V/120V, and the red power indicator light will come on. This light will remain on all through the preheating and cooking session. Allow the device to preheat.
Step 2:
It takes the waffle maker about 5 – 8 minutes to preheat. While it is preheating, you need to start preparing your batter according to your chosen recipe.
Step 3:
When the device is fully preheated, a green will come on, and it will be accompanied by a beep to alert you. Quickly use a pastry brush to cover the lower and upper cooking plates with either vegetable oil or non-stick spray. This will prevent your waffles from sticking to the plate. However, you don’t need to coat the plates before each batch of waffles. You only need to do it before the first waffle-making session of the day.
Step 4:
Now, you can pour the batter into the grid. If you’re using a Villaware waffle maker with a single face, you can pour in ¾ cup of batter at a time. If the device has multiple faces, you can pour more. Don’t forget to spread the batter evenly over the grid with a spatula. Gently close the waffle maker and allow the cooking to begin. After some seconds, the green ready light will go off.
Step 5:
Wait for at least 1 ½ minutes before opening the device to check if the waffles are done. If you open it too early, the waffles may end up sticking to the cooking plates.
Step 6:
When the waffles are ready, the green light will come on again, and you’ll also hear an audible beep. At that point, you can check the waffles. If they are crispy and brown enough for you, remove them with a spatula. And if they are not, let them cook for one or two minutes longer.
If you intend to cook multiple batches of waffles, wait for the green light to come on before pouring the batter in. And if you need to take a short break before making waffles, keep the device closed to retain its heat.
How Much Batter Do You Put in a Villaware Waffle Maker?
The quantity depends on the recipe and your model of the Villaware waffle maker. As explained above, the brand has several models of waffle makers. Some models have only one face, while other models have more than one face. If your waffle maker has only one face, you should not put in more than ¾ cup of batter at a time.
This also means that if your waffle maker has double faces, you can put 1 ½ cups of batter. That is double the quantity that a single-face waffle maker can take. Waffle makers that have up to 4 faces can take 4 times ¾ cup of batter.
You should also ensure that your batter is thick and lumpy so that it can produce thick and crispy waffles. A runny batter may be great for pancakes, but it is not good for waffles. And if you end up with more waffles than you can eat, toss the excess waffles into your freezer. You can always warm them in an oven whenever you want to eat them.
How Long Do You Cook A Waffle in a Villaware Waffle Maker?
It takes the device about 5 – 8 minutes to preheat and an additional 4 – 6 minutes to cook your waffles. So, you can set aside about 9 – 14 minutes for the total cooking time. Thankfully, the device will alert you with a green light when your waffles are ready. Of course, your attention can be taken away from the waffle maker momentarily. That’s where its audible sound comes in. The green light is accompanied by an audible sound. So, you can’t possibly miss the alert.
How Do You Clean a Villaware Waffle Maker?
You should always brush the surface of the cooking plates to remove crumbs of waffles when you’re done making waffles. After that, wipe the plates with a paper towel to absorb oil from the surface. Also, use another paper towel to wipe the exterior of the device.
Final Word
Villaware is a brand that offers several models of waffle makers. You can choose the model that fits your lifestyle. All the waffle makers take about 5 – 8 minutes to preheat and about 4 – 6 minutes to cook your waffles. You need to start with setting #3 or #4 when using the device for the first time. Over time, you’ll discover the setting that bakes the best waffles.
- Texas Shaped Waffle Maker: Crafting State Pride on Your Plate - September 26, 2023
- Bubble Waffle Maker – Elevate Your Culinary Skills - September 26, 2023
- Tater Tot Waffle Toppings: Fun & Delicious Ideas for All! - August 7, 2023
