Hamilton Beach is a popular brand of waffle maker that offers several models. This gives buyers more options. Also, it has a lid latch the prevents that unit from accidentally opening up while in use to avoid spilling over. In addition, when you switch on the device, you’ll see a blue light.
After heating up, it will show the green light to indicate that it is ready to cook your waffles. It’s good to state clearly that the blue light is different from the green ready light. While the blue light stays on until you unplug the device, the green light goes on and off during the baking of the waffle.
How to Use the Hamilton Beach Waffle Maker?
Plug the device into an outlet and switch the outlet on. The blue light will come on.
Preheat the waffle maker and wait until the green light comes on. You’ll get the best waffles that way.
Once the green light comes on, you need to apply some non-stick spray to the grid. This is necessary if you intend to prepare dessert waffles or your batter has a lot of sugar. This is because sugar can be sticky when it’s heated. It may cause the waffle to stick.
Pour in your batter. The square grids can collectively take up to 80 ml of batter. Don’t exceed that quantity. Otherwise, things could get messy.
Close it and fasten the latch.
By now, the green light will be going off and on. Wait until the waffle is done. It takes about 3 – 6 minutes for the Hamilton Beach waffle maker to make your waffles, depending on the recipe. You can wait for up to 5 minutes before you check the waffle for doneness. If the lid pulls back while trying to open it, leave the waffle to cook for one more minute.
How to Clean Hamilton Beach Waffle Maker?
Make sure you clean the waffle maker after every use. Wait for it to cool down completely before you try to clean it. Soak a piece of cloth in soapy water. Use it to wipe the interior and exterior of the appliance. After that, you can soak the cloth in clean water and use it to wipe every part of the device again. Allow it to dry up before you store it.
Hamilton Beach Waffle Maker Cooking Time
It takes about 3 – 6 minutes. Different waffle recipes take various lengths of time to cook. However, you can always check your waffles if your waffles are ready after cooking for about 4 – 5 minutes.
How Do You Know When a Hamilton Beach Waffle Is Done?
When you try to open the waffle maker, the lid will pull back if the waffle is not ready. In that case, you should allow it to cook for one minute more. On the other hand, if the waffle is ready, the lid won’t pull back.
How Much Batter Do You Put in the Hamilton Beach Waffle Maker?
The waffle maker can take about 80 ml of batter. Of course, it can take more, but the batter could spill when it rises. So, to avoid a messy counter, don’t pour more batter than 80 ml. Even if you have some batter left, you should make the waffles in batches.
The Hamilton Beach waffle maker is quite easy to use. When you plug it in, a blue light will come on. When it is heated enough, its green light will come on. The device takes about 3 – 6 minutes to prepare a waffle, and it can only take 80 ml of batter. Make sure you clean it after every waffle-making session. Most importantly, never clean it with a scrubbing brush or strong abrasive. This could remove its non-stick coating.